RF-1 Ampoule Fusing melter Machine Tube Glass Fusing Lamp Seal for Laboratory

Description

Ampoule melting machine is a new product introduced by our company. It is a product integrating control box and sealing table. It has the advantages of innovative design, small size, more convenient storage, even flame, smoother drawing and faster sealing , The use of gas or liquefied petroleum gas as fuel, compared to the more traditional process, saving time and costs, work more efficient. Is the hospital, preparation room, schools, research institutes, small pharmaceuticals, biological agents Fuse ampoule ideal equipment.

Feature

The traditional ampoule fuse sealer compared with the current ampoule melter

The traditional ampoule sealing machine: the control box and seal Taiwan two parts, found in the long-term use of the following shortcomings: the preparation of the need for temporary connection to help gas pump tube; control box and seal Taiwan is not easy to adjust the display; use To be pulled to the end of the trachea, and then divided into two parts to take, move, keep. Reuse, prone to: Console and fused Taiwan supporting confusion, improper patch, flame instability, loss of spare parts.

Improved ampoule melting machine: we will improve the two machines into one machine, to help the pump tube has been pre-plug good, when used, just connected to gas or liquefied petroleum gas, gas and gas to help adjust the switch, you can Get even concentrated flame. When heating the ampoule, slowly rotate the circular ampoule to place the platform so that the bottleneck is heated evenly. When softened, tighten the upper end of the ampoule bottle neck with tweezers, and the bottom of the ampoule bottle neck can be melted smoothly. And work without noise, sealing speed, preparation, storage convenient, simple machine.

This machine can seal the ampoule and test tube of 1-20 ml specifications. For small pharmaceuticals, biological agents plant, hospital laboratories, schools and other agencies to use.

Sealing machine use method:

1, connect the gas pipeline. (Behind the device mix tee right needle valve interface)

2, plugged in the power cord (socket on the upper right corner behind the device).

3, turn on the power switch (the upper right corner of the front of the device).

4, slowly open the gas needle valve, until the point of the lamp.

5. Slowly open the gas-assist needle valve (lower left corner on the back of the unit) until both heads emit an elongated blue flame (the slender the flame, the better).

6, the ampoule placed on the tray, do not immediately put the flame first, we must first look at the flame is in the tray center point, and whether it is in the required height of the seal (just release a twist on the bracket can be arbitrary Choose, then tighten)

7, fill the liquid medicine ampoule bottle and then placed in the center of the flame. The left hand slowly and slowly turn the bottle, and so burn to forging red when the right hand tweezers can be pulled away.

8, the work must be closed after the end of the gas valve, and then turn off the gas valve.

Precautions

1, gas cylinders and gas generating room must be 6m above the working position.

2, when ignited, please do not avoid any parts of the body in front of the flame gun mouth, the lighter ignition, should be located in the flames side of the gun, to avoid burning to the hands. Also have to turn off the ignition gas valve, but rather slowly open the gas while igniting the valve. Until the point after adjusting the appropriate degree of flame.

3, gas pipe and the needle on the three-way control valve must be connected, do not have a little leak, so as to avoid accidents.

4, when in use, open the gas needle valve and gas valve to help gas should pay attention to the speed should be slow and uniform, not too fast, so as to avoid accidents.

5, melted ampoule bottle should be careful to slowly turn the bottle, to be softened before tweezers will be the top of the interception, the bottom of the bottle can melt seal.

6, the machine can not be directly rinsed with water, so as to avoid mechanical damage.