How would like to contact us?

Dry Ovens & Hot Plates

Hot Plates, Drying Ovens, & Other Heating Devices
Introduction

Ovens are commonly used in the laboratory to remove water or other solvents from chemical samples and to dry laboratory glassware before its use. Other heating devices, such as hot plates and heating mantles, are used for a variety of purposes.

Burns and other injuries can occur when heating devices are not used properly. Regardless of the type of heating device used, never heat a sealed container, and always use the device as intended especially when used with or near flammable or combustible solvents or materials. Heating devices must be rated/approved for the use and the environment in which it will be used (i.e., flammable or explosive atmospheres, in the presence of combustible dust, indoors or outdoors, etc.).

Drying Ovens

Because of the possible formation of explosive mixtures by volatile substances and the air inside an oven, laboratory ovens should be constructed so that their heating elements (which may become extremely hot) and their temperature controls (which may produce sparks) are physically separated from their interior atmospheres. Small household ovens and other similar devices do not meet this requirement and, consequently, should not be used in laboratories. Obviously, because of the spark potential, ovens should also be located away from potential fuel sources (i.e., common combustible materials like cardboard and paper, organic solvent storage areas, etc.).
With the exception of vacuum drying ovens, laboratory ovens rarely have any means of preventing the discharge of material volatilized within them. Thus it should be assumed that these substances will escape into the laboratory atmosphere but may also be present in sufficient concentration to form explosive mixtures within the oven itself. Venting the oven to an exhaust system will reduce this hazard.
Drying ovens should not be used to dry glassware that has been rinsed with organic solvents.
Do not use mercury thermometers to monitor oven temperatures. Accidental breakage of the thermometer will cause a serious hazard since uncontained mercury will volatilize very rapidly.
Heating Devices

The actual heating element of any heating device should be enclosed in a glass, ceramic, or metal case. Heating devices (such as heating mantles) require autotransformers to control the temperature.
Auto-transformers must be wired according to code and have a two-pole switch, a three-prong plug, and a power overload device. These devices are to be located away from areas where flammable vapors are produced.
Unattended heating devices must be protected with overload circuitry and with a temperature-sensing device that will turn the power off in the event of overheating.
When cooling water is used in connection with heating (as in the condenser of a solvent still), an automatic device to turn off the power when water flow is interrupted is absolutely necessary.

Filter

Showing 1–12 of 24 results

Added to wishlistRemoved from wishlist 0
Add to compare
- 11%
$2,800.00 $2,500.00
Added to wishlistRemoved from wishlist 0
Add to compare
- 18%
$2,200.00 $1,800.00
Added to wishlistRemoved from wishlist 0
Add to compare
- 13%
$2,300.00 $2,000.00
Added to wishlistRemoved from wishlist 0
Add to compare
Product characteristics : 1. Vacuum environment greatly reduces the boiling point of liquid to be expelled, so vacuum drying can be easily applied to thermal sensitive substances. 2. Vacuum drying can effectively shorten the drying time for samples that are not easy to dry, such as powder or other granular samples. 3. All kinds of mechanical parts or other porous samples with complex structures are cleaned and dried by vacuum drying without any participatory substances. 4. It is safer to use and completely eliminate the possibility of thermal explosion of oxides under vacuum or inert conditions. 5. Compared with the ordinary drying relying on air circulation, the powder sample will not be blown or moved by the flowing air.
Call for Price
Added to wishlistRemoved from wishlist 0
Add to compare
Product characteristics : 1. Vacuum environment greatly reduces the boiling point of liquid to be expelled, so vacuum drying can be easily applied to thermal sensitive substances. 2. Vacuum drying can effectively shorten the drying time for samples that are not easy to dry, such as powder or other granular samples. 3. All kinds of mechanical parts or other porous samples with complex structures are cleaned and dried by vacuum drying without any participatory substances. 4. It is safer to use and completely eliminate the possibility of thermal explosion of oxides under vacuum or inert conditions. 5. Compared with the ordinary drying relying on air circulation, the powder sample will not be blown or moved by the flowing air.
Call for Price
Added to wishlistRemoved from wishlist 0
Add to compare
Product characteristics : 1. Vacuum environment greatly reduces the boiling point of liquid to be expelled, so vacuum drying can be easily applied to thermal sensitive substances. 2. Vacuum drying can effectively shorten the drying time for samples that are not easy to dry, such as powder or other granular samples. 3. All kinds of mechanical parts or other porous samples with complex structures are cleaned and dried by vacuum drying without any participatory substances. 4. It is safer to use and completely eliminate the possibility of thermal explosion of oxides under vacuum or inert conditions. 5. Compared with the ordinary drying relying on air circulation, the powder sample will not be blown or moved by the flowing air.
Call for Price
Added to wishlistRemoved from wishlist 0
Add to compare
Product characteristics : 1. Vacuum environment greatly reduces the boiling point of liquid to be expelled, so vacuum drying can be easily applied to thermal sensitive substances. 2. Vacuum drying can effectively shorten the drying time for samples that are not easy to dry, such as powder or other granular samples. 3. All kinds of mechanical parts or other porous samples with complex structures are cleaned and dried by vacuum drying without any participatory substances. 4. It is safer to use and completely eliminate the possibility of thermal explosion of oxides under vacuum or inert conditions. 5. Compared with the ordinary drying relying on air circulation, the powder sample will not be blown or moved by the flowing air.
Call for Price
Added to wishlistRemoved from wishlist 0
Add to compare
Product characteristics : 1. Vacuum environment greatly reduces the boiling point of liquid to be expelled, so vacuum drying can be easily applied to thermal sensitive substances. 2. Vacuum drying can effectively shorten the drying time for samples that are not easy to dry, such as powder or other granular samples. 3. All kinds of mechanical parts or other porous samples with complex structures are cleaned and dried by vacuum drying without any participatory substances. 4. It is safer to use and completely eliminate the possibility of thermal explosion of oxides under vacuum or inert conditions. 5. Compared with the ordinary drying relying on air circulation, the powder sample will not be blown or moved by the flowing air.
Call for Price
Added to wishlistRemoved from wishlist 0
Add to compare
- 16%
It is suitable for drying, baking and heat treatment of articles in laboratories of industrial and mining enterprises, colleges and universities, scientific research institutes, medical and health units. Range of temperature:RT+5-300℃; Rated power(KW):0.6 Outer Dimensions(D*W*H) : 400x530x390mm; 15.7x20.9x15.4 inch; Inner Dimensions(D*W*H): 250x250x250; 9.8x9.8x9.8 inch.
$1,025.00 $866.00
Added to wishlistRemoved from wishlist 0
Add to compare
- 31%
It is suitable for drying, baking and heat treatment of articles in laboratories of industrial and mining enterprises, colleges and universities, scientific research institutes, medical and health units. Range of temperature:RT+5-300℃; Rated power(KW):0.6 Outer Dimensions(D*W*H) :500x640x500, 16.7x25.2x16.7 inch; Inner Dimensions(D*W*H): 350x350x350, 13.8x13.8x13.8 inch.  
$1,670.00 $1,159.00
Added to wishlistRemoved from wishlist 0
Add to compare
- 13%
It is suitable for drying, baking and heat treatment of articles in laboratories of industrial and mining enterprises, colleges and universities, scientific research institutes, medical and health u nits.
$1,599.00 $1,399.00
Added to wishlistRemoved from wishlist 0
Add to compare
- 35%
Product Overview It is suitable for drying, baking and heat treatment of articles in laboratories of industrial and mining enterprises, colleges and universities, scientific research institutes, medical and health units. Range of temperature:RT+5-300℃; Rated power(KW):1 Outer Dimensions(D*W*H) :500x640x500, 16.7x25.2x16.7 inch; Inner Dimensions(D*W*H): 350x350x350, 13.8x13.8x13.8 inch.
$2,350.00 $1,519.00
Enable registration in settings - general
Compare items
  • Total (0)
Compare