Free Shipping on orders over US$39.99 mail:[email protected]

Michell Instruments Easidew 2-wire Dew-Point Transmitter


Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

99 in stock

Design Simplicity and Economy The Easidew Transmitter is designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible. For the first time, dewpoint measurement is made as accessible as temperature and pressure with this fully configured, calibrated transmitter that can be instantly incorporated into your air or gas management control system. Easidew Transmitter is easy to install and operate. The costs of installation and operation are minimal due to the ruggedness, simplicity and reliability of the transmitter.

The key to the Easidew Transmitter’s performance is its sensor technology. Michell’s Advanced Ceramic Moisture Sensor is coupled with the latest microprocessor-based measurement circuitry to produce a fully calibrated and interchangeable transmitter. All calibration data is stored in flash memory and so exchange or service can be accomplished in seconds. The Easidew Transmitter is simply disconnected, removed from its sampling block and replaced by a new, fully calibrated unit.

• 2-wire loop powered connection
• Dew point or ppm moisture content
• NEMA 4, IP66
• Excellent sensor protection
• Measurement range -100 to +20°C (-148 to +68°F)
• Operating temperature -40 to +60°C (-40 to +140°F)
• Fast response

The Easidew Transmitters use Impedance technology, based on Michell’s ceramic sensor. The Ceramic Sensor is constructed using state of the art thin and thick film techniques. Operation of the sensor depends upon the adsorption of water vapor onto a porous non-conducting “sandwich” between two conductive layers built on top of a base ceramic substrate. The active sensor layer is very thin – less than one micron (about 0.00004 inches) and the porous top conductor that allows transmission of water vapor into the sensor is even thinner. Therefore the sensor responds very rapidly to changes in applied moisture, both when being dried (on process start-up) and when called into action if there is moisture ingress into a process. Despite this extreme sensitivity to changes in moisture content, the Michell Ceramic Moisture Sensor is incredibly rugged due to the nature of its construction. To protect the sensor further against contaminants and pipe swarf it is housed in a protective sintered HDPE guard. All Michell Ceramic Moisture Sensors give <±2°C (±3.6°F) dew point accuracy and excellent long-term reliability and stability in process applications.



Michell Instruments

Manufacturers of dew-point transmitters, cooled mirror hygrometers, relative humidity sensors, process moisture analyzers, hydrocarbon dew-point analyzers, ...

Easidew Transmitter and Comms kit

___ Thanks for watching, for more information click the links below. Visit our website: Follow us on Twitter: ...

MICHELL EA2-TX-80HD - Dew point transmitter - Trasmettitore del punto di rugiada

Product available:

The videos are from Youtube, if there is any infringement, we will delete them, please send an email to [email protected], thanks.

Michell Instruments Easidew 2-wire Dew-Point Transmitter
Michell Instruments Easidew 2-wire Dew-Point Transmitter


You may also like…

- 15%
Added to wishlistRemoved from wishlist 0
Add to compare
Register New Account
Reset Password
Compare items
  • Total (0)