Application of Vacuum Pump in Mold Temperature Control Equipment
Leybold vacuum pump SV100B is used for mold temperature control equipment in plastic industrial water mold machines and casting industrial mold temperature machines.
The mold temperature controller is also called the mold temperature controller, which was originally used in the temperature control industry of injection molds. Later, with the development and application of the machinery industry, the mold temperature machine is generally divided into a water temperature machine and an oil temperature machine, and the temperature control accuracy can reach ±0.1℃.
Precautions for using Leybold vacuum pump SV100B in die casting industry oil mold temperature controller:
- Check whether there is enough thermal media and whether there is pressure. When replenishing hot oil, make sure that it is within the range of the oil level gauge. If it is too low, it will alarm, and if it is too high, it will not start.
- Exhaust, air will affect the heat transfer efficiency, and also affect the efficiency of the pump. Run for 10 minutes first, after the pressure is normal, heat to 120 degrees, and then exhaust.
- When refueling, pay special attention not to have impurities. There are examples that damage the pump head. The stable synthetic oil should be changed regularly, and the temperature should be lowered during shutdown to reduce fouling.
If you need to purchase Leybold vacuum pump SV100B, you can provide our sales department with detailed information about the brand and model of the vacuum pump, vacuum requirements, pumping speed requirements, motor power, speed, voltage, material requirements, and whether to bring accessories. So that we can quickly and accurately select a suitable vacuum pump for you.
