Labideal has a modern factory building, advanced equipment and a high-quality workforce. Choosing the products of Labideal  Vacuum-finding the best business ...

Metal hoses are classified according to the manufacturing process: welded metal hoses and non-welded metal hoses 2. Metal hoses are classified according ...

Metal bellows are classified according to the use: metal bellows for elastic elements, metal bellows for linkage shafts, metal bellows for compensators, ...

Quick joints can be divided into two types: open and close at both ends, open at both ends, and single open and close. 1. Open and close at both ends ...

The electromagnetic vacuum valve and the electromagnetic vacuum differential pressure valve are specially used to prevent the return oil of the mechanical ...

Mechanical seal Traditional roots vacuum pump seal structure and sealing method is relatively simple, in the drive shaft end is generally used framework oil ...

Fluid medium inside the heat pipe: Very low temperature (- 273-70 ℃) helium, argon, krypton, nitrogen, methane Low temperature (- 70 ~ 200 ℃) freon, ...

When the vacuum pump performs energy conversion, there is always a small part of the loss converted into heat. It must continuously radiate the heat through ...

Vacuum drying is a kind of drying method that materials are placed under negative pressure and heated properly to the boiling point under negative pressure or ...

The oxide film on the metal surface during soldering affects the wettability of the liquid solder to the base metal. During the brazing process, if the oxidase ...

The high vacuum baffle valve is used to connect or cut off the vacuum pipeline. Its working principle is to close and open the valve by the up and down ...

Screw vacuum pump is a dry operation, non-contact, screw vacuum pump its advantages: There is no medium in the working chamber, so a clean vacuum can be ...